Dolby Headphone Vs Stereo: Which Is Better And Why? [Explained]

Dolby Headphone Vs Stereo: Which Is Better And Why?

A lot of people have been wondering about Dolby Headphone Vs Stereo. There’s a lot to take into consideration when it comes to choosing the right headphone for you.

Some people prefer stereo while others swear by Dolby Headphones for their crisp sound quality. Keep reading our post, Hooke Audio will show you: Which is better and why?

Surround sound – What it is and how it works

Surround sound - What it is and how it works

Surround sound enhances audio quality and depth. It mimics an actual sound field by using multiple channels. This creates an immersive auditory experience.

This allows a person to pinpoint the source of a particular sound like is. It doesn’t matter if it is above, below, or far left. Surround sound technology will enable users to identify where the sound comes from.

In 1940 Disney’s animated film Fantasia, surround sound was used for the first time.

Types Of Surround Sound In Headphones

True Surround Sound

Authentic surround sound refers to an audio system using tiny speakers to create lifelike sound imaging. Older models had four channels, but the newer versions have 6 or 8 channels (5.1 or 7.1).

Virtual Surround Sound

Virtual surround sound is not like surround sound. It creates the same effect using artificial means, and it has only two speakers, one for each ear. It uses different algorithms to trick the ears into believing that different sounds are coming from different directions.

Differences between Virtual and Real True Surround Sound

Virtual and true surround sound’s differences don’t end in how they produce 3d sounds. Some of these are:


The cost is the most noticeable difference between them. Different brands will have different prices. True surround sound headphones tend to be more expensive than virtual surround sound headphones. The reason is that the former has five or more speakers, while the latter has only two.

Quality is key

True surround sound headphones include multiple speakers and drivers inside their housing. This makes them heavier and bulkier. True surround sound headphones are lighter and have lower costs.

Sound quality

True surround sound headphones provide a much better multi-directional surround sound. Most people agree that the sound quality is not significantly different between the two.

Some people even claim that virtual surround sound headphones produce better sound quality. They are also more powerful and intense because their drivers are more significant.

5.1 or 7.1

These are the terms you most likely came across when searching for surround sound headphones.

The 5.1 surround sound headphones come with five speakers and one subwoofer. The 7.1 surround sound headphones have seven speakers and one speaker; the 7.1 surround sound headphones offer a richer soundscape because they have more drivers.

5.1 or 7.1 surrounds were initially reserved for surround sound headphones. These terms can now be used for virtual surround sound headphones, thanks to recent advances.

Is it worth buying a Pair of Headphones with built-in surround sound?

You might wonder if headphones with virtual surround positional audio are worth the investment. The short answer to your question is yes.

Improved support means a more immersive experience.

For gamers who want a more immersive gaming experience, a gaming headset with surround sound like the best choice. These headphones offer better support. They are also compatible with specific positional audio and video formats, thanks to their built-in specifications.

Plug-and-play configuration

It is easier to buy headphones with surround sound. You won’t have to install third-party apps or modify your device’s settings. You can plug it in, and then you can play to your heart’s delight.

Stereo – What it is and how it works

Stereo is one of the most common electronic devices in the house today. You can have a giant stereo system or a small unit that plays CDs. Stereos in most homes are docking stations for an iPod or MP3 player that plays stored music through stereo speakers. This allows the music to be shared with everyone.

Although there are many intricate, small-sized electric components within a stereo system, it is essentially composed of three parts: the audio source, speakers, and amplifiers. Each piece does its job to share music with other occupants.

The audio source is typically an MP3 player, a CD player, but it could also be a radio or another device. The preamplifier will decode and read the audio information from the source and then send it to the amplifier. The amplifier then amplifies the signal and sends it on to the speakers.

The speakers then convert the audio signal into the correct sound, transmitted through the speakers to everyone.

Some stereos combine the preamplifier and amplifier to create one device. In others, they are two distinct components.

Types Of Stereo Sound

Audio Sources

An analog or digital device can store some sound recording. The audio information will be sent using an electrical signal.

An audio cable transmits the electrical signal. This audio signal was recorded using an analog device, which is not a stereo that plays music.

You can send it back to the stereo with either an analog or digital signal. It will also determine which type of signal it uses.


The preamplifier is the brains behind stereo systems, something that most people don’t realize. It is more than just the brains of the operation. It is also the primary control center.

It will detect the signal and split it into the correct channels. It will, for example, break down a 2-channel audio signal into two tracks: left and right.

Preamplifiers also increase the voltage of the signals when they receive them from the audio source. Then, it sends it to the amplifier.


In a stereo system, the amplifier is responsible for significantly increasing power. The preamplifier sends out the signal, but it is too weak to drive the speakers. To make any sound possible, the coil vibrates so that the call can be heard.

The amplifier will then increase the power to vibrate the cones of the speaker coils, releasing the sound for everyone to enjoy.

The Speakers

Many drivers are used in the fundamental traditional speaker. Each driver has a stationary magnet, an electromagnetic coil, and either a cone (or a dome) as its driver.

The amp will send an electric signal to the speakers, and it will produce an alternating current. This means that the wind is constantly switching directions. An alternating current running through a coil of wire will cause a magnetic field to reverse its polarity.

If the coil’s polarity changes, it will create a magnetic field that alternates between attraction and repellence.

The magnetic force causes the electric voice coil to oscillate constantly. It will vibrate the dome or cone as it oscillates. The cone or dome will vibrate when it vibrates. This vibration also vibrates the molecules in the atmosphere, which are the vessels that carry the sound from your stereo to your ears.

Each driver in the speaker is responsible for a particular frequency range. A tweeter is responsible for high frequencies, while a woofer is responsible for low frequencies. The mid-range driver handles the mid frequencies.

Crossover circuitry breaks down the signal when it enters the speaker. After the audio information has been broken down, each bit will be sent to the driver.

Surround Sound vs Stereo Sound

It might seem like it is pretty different from stereo sound. Stereo almost always produces either left or suitable sound options. Surround makes you feel like you are there with its three-dimensional sound imagery.

Subwoofers are always included in surround sound systems. Stereo systems, on the other hand, usually do not.

Subwoofers produce very low-frequency tones. Subwoofers produce sounds that are so low our ears cannot hear them. It has powerful vibrations that enhance the audio quality experience.

The Differences between Dolby Digital Vs Stereo headphones?

If you have seen any advertisements online or on TV, you would know that many people swear by Dolby’s sound technology. This is because these headphones allow for an amazing audio experience, but why do they do this?

Dolby digital headset are more advanced than stereo.

Dolby Digital Headphone

  • Using Dolby digital technology to create a virtual environment for the listener to enjoy.

This means that they can create an audio experience in which, as you move around, the sound follows you. To create a unique virtual environment for its listeners, making it an instant hit with audio enthusiasts worldwide.

  • Headphones can deliver full and rich bass sounds due to Dolby pro logic processing. This makes a great choice for people who are into bass-heavy music, as headphones can deliver high-quality audio without distorting the sound at all.
  • It also impresses gamers. Gaming headsets have amazing graphics and realistic sound effects, which helps in immersing themselves in the game.
  •  Allows users to customize their listening experience and create a virtual world audio-specific to their needs and requirements. This makes headphones an ideal choice for people looking for an amazing audio experience.

They can choose from various sound profiles, including headphones, headphone mode with Dolby pro logic processing, cinema mode, and headphone music mode.

This way, you can enjoy your favorite audio tracks in a manner that befits the mood or genre of the particular track.

The Differences between Dolby Vs Stereo headphones?

  • Technology reduces outside noise by up to 95%, and this can deliver an immersive audio experience that enhances the listening experience.

It is a great investment for people looking for a great portable audio solution that can work perfectly with DVD players, satellite receivers, DTV, or even gaming headsets.

  • It has cost more than the stereo. Offering Dolby pro logic processing that makes headphones a unique audio solution for DVD players and satellite receivers.

On the other hand, stereo does not offer pro logic processing in their headphone mode.

  • Playing games is certainly a great investment as they enhance the audio experience. You can achieve high-quality audio in another mode.


 The Differences between Dolby Vs Stereo headphones?

  • Stereos are headphones that have distinct playback sounds out of the two speakers, the left speaker, and the right speaker. Stereo works by playing sound from two independent channels, a left channel for the left speaker output and a right channel for the right speaker output.

This way, distinct sounds come out of the two speakers. This contrasts mono headphones, which cannot playback independent, distinct sounds out of the two speakers but play the same sound out of both speakers.

  • Offering the advantage that they can play sound with a surround sound effect. Suppose a recording is taken in a room, and different sounds come from the room’s left and right sides.

In that case, a recording can be taken that picks up both sounds from the left and right as they occur and records them on two separate channels, one for a left side recording and the other for a right side recording.

With monaural headphones, sound can only be played back on one channel, usually the left, and the other channel is ignored.

So if a monaural headphone is used, it can only playback sound from the left channel or the left sounds of the room. However, with stereo, the left and right side recordings can be played back since stereo playback sounds from both channels. This is the advantage of stereo.

  • Stereos are by far the most common type of headphones now in the market and use. Most audio now, including the radio, cinema, and video games, all produce sound on two separate channels, a left side recording, and a right side recording, to give a surround sound effect.

To playback these sounds as they are made, stereo must be used.



With so many different sound sources available, it can be hard to know which is best for you.

The decision between stereo vs dolby headphones comes down to what type of listening experience you want – or if you are looking for a mix of the two! While both offer great audio quality, one might work better than another, depending on your situation.

If this post has helped clarify any questions about how these technologies compare with each other, HookeAudio would love to hear from you in the comments section below! And as always, thanks for reading.

Previous Posts:

How To Make Your Headphone Louder?

Bragi Dash Vs Headphones?

Leave a Reply

Your email address will not be published. Required fields are marked *