How To Connect Soundbar To TV 2023? Top Full Guide

How To Connect Soundbar To TV Top Full Guide 2023
  • Anthony

There are a few things you need to know about how to connect soundbar to TV. First, you need to make sure that your soundbar is compatible with your TV. Some soundbars have specific ports designed to work with certain types of TVs.

Once you’ve confirmed that your soundbar is compatible with your TV, you need to determine how you want to connect the two devices. The most common way to connect a soundbar to a TV is via an HDMI cable.

Know What All The Sound Bar Connection Ports Do

Know What All The Connection Ports Do

Before you begin plugging in cords, familiarize yourself with the ports on the back of your soundbar. If you’re unsure about anything, consult the associated instruction manual; if you don’t have a physical copy, you can typically obtain a digital version from the manufacturer’s website.

The most common interface is the HDMI (High-Definition Multimedia Interface). HDMI connections simultaneously communicate high-quality audio and video, whereas soundbar connections only transmit audio.

HDMI ARC (audio return channel), which enabled two-way audio in 2009, and HDMI eARC (enhanced audio return channel), a 2017 version that brought greater bitrates, richer surround sound, and compatibility for additional audio codecs.

You’ll connect that connector to your TV regardless of whether your soundbar supports HDMI, HDMI ARC, or HDMI eARC.

However, it is important to note that if you have basic HDMI without the extra acronyms, you may not have access to the same capabilities and sound quality as the newer connections. If you have an older soundbar that does not support eARC, you should consider upgrading.

An optical digital audio connector may also be included alone or with an HDMI connection. This will provide high-quality audio but not as excellent as HDMI eARC, and this sort of connector has been progressively phased out on newer devices as the eARC standard has taken over.

A 3.5mm analog audio cable connection may be found on the oldest, smallest, and cheapest soundbars. You may use this soundbar connection to TV, but the audio quality will be poor. You should also notice a port for the soundbar’s power connection.

If a more direct (and reliable) connection to the internet is required, the second-generation Sonos Beam has an Ethernet connector.

How To Connect Soundbar To TV?

How To Connect Soundbar To TV

The standard rule of electronics applies here: turn off anything you’re working with while connecting it all. First, turn on your soundbar and connect it to your TV. This is normally done via an HDMI cable, but you may also need to utilize one of the alternate connections.

Unfortunately, selecting HDMI cables is more difficult than it should be. While almost any cable will support HDMI ARC, to use HDMI eARC, you must use a cable branded HDMI with Ethernet, high-speed HDMI cable with Ethernet, or the newest (and best) ultra-high-speed HDMI cable (which features the best resolutions and bitrate).

While shopping, keep this in mind: HDMI cables should state which standards they support on their package or online. If your soundbar comes with one, that’s even better.

Older HDMI cables will operate with an HDMI eARC soundbar, but not all the greatest features will be available. It’s the same with televisions, where HDMI eARC has been accessible on recent models: An older television with a non-eARC HDMI connector will still produce sound, but not at the high quality that eARC provides.

If your TV has an HDMI eARC port, that’s the one to use for connecting; otherwise, any available HDMI port will suffice. After connecting the soundbar to the TV, ensure the cords are securely in place. If you’re using optical digital audio or analog audio, check for the matching port on your TV, which should be labeled appropriately—the instruction booklet for your TV may assist.

Finally, arrange your TV and soundbar as desired (along with your subwoofer, if one is present), then turn on the television first, followed by the soundbar. If all goes properly, the two devices should be able to connect and function almost immediately.

Finish The Soundbar Setup

Connecting a soundbar to a TV isn’t a difficult job, and your equipment should function right away—especially if you have newer gear that supports the newest standards. To hear the difference in audio quality, turn on some sports or a movie.

It would help if you also experimented with the audio settings on your television. We can’t provide instructions for every model, but the audio settings menu should be easy to discover with your TV remote.

In certain circumstances, you may need to choose the soundbar as the audio output to compel sound to escape your connected speaker rather than the TV’s settings. You may also discover that you may change the audio output quality and unlock other functions (such as Dolby Atmos or DTS:X).

While browsing these options, check for CEC (consumer electronics control) or HDMI-CEC. Essentially, they allow you to use your TV remote to control your soundbar’s volume and on/off status (and via the HDMI cable). You’ll want this enabled most of the time, and it’s likely to be enabled by default on the vast majority of sets.

Your soundbar may have a few settings to experiment with as well. However, we can’t provide a thorough guide to all of the soundbars available. The Sonos Beam (Gen. 2) incorporates touch controls for volume control on the device itself and an associated mobile app that allows you to beam music to it directly from applications on your phone, for example.

All that remains is for you to appreciate the advantages and better audio quality of your new soundbar. If nothing is functioning properly, try switching to a different HDMI port on your TV, changing the HDMI cable (preferably a new one), and going into the audio settings on your television set.

Relevant posts:

Watch more here:


What is the best way to connect a soundbar to a TV?

An HDMI cable is the finest method to connect your soundbar to your TV. This is because HDMI transports audio digitally, which is raw and uncompressed. Furthermore, HDMI cables can support the most expensive soundbars, including those that enable surround sound.

Is it better to connect the soundbar with HDMI or optical?

The main distinction is that HDMI connections can transmit higher definition audio, such as Blu-ray formats like Dolby TrueHD and DTS HD Master audio. These high-resolution audio formats will not be sent through fiber-optic connections.

Do soundbars need HDMI?

Most home entertainment equipment uses HDMI, but that doesn’t imply you need HDMI connections on your soundbar. Instead, connect your home theater gadgets to your TV and the soundbar through the TV’s audio output.

Why do soundbars have 2 HDMI ports?

So, why do Soundbars have HDMI (or, for that matter, HDMI eARC – see our top 7 list)? HDMI connections transmit visual and audio data between the source media and the Soundbar. Because just one sound bar connection is required, HDMI enables you to produce high-quality sound and video without the nee cables.


There are many benefits of connecting a soundbar to your TV. A soundbar can improve the sound quality of your TV, making it more enjoyable to watch. Additionally, a soundbar can make it easier to hear the dialogue in movies and TV shows. If you have trouble hearing the dialogue on your TV, a soundbar can be a great solution. Thanks for reading!

Leave a Reply

Your email address will not be published. Required fields are marked *