How To Fix Headphone Wires With Tape? Top Full Guide 2021

How To Fix Headphone Wires With Tape? Top Full Guide 2021

Do you know how to fix headphone wires with tape? You’ve heard it, but one day, it has broken headphones, how to fix or choose replacement headphone cable. See now in this article of Hooke Audio to know more.

Identifying the problem

Identifying the problem

First, identify the problem. It will be difficult to know where you should start. You must take care of the following:

  • You should check the condition of the headphone.
  • Cats chewing the wire can cause it to break.
  • If the wire on one side of the earpiece does not work, it means that the broken wire or disconnected.
  • Cracks indicate that the connection may not be complete.
  • If you find one side dead, it is time to repair the entire thing.
  • Most common is the disconnection in the plug or lead wire.

Read More: How To Fix One Headphone Not Working?

How to Repair Your Frayed Wires or Broken Headphone Wires With Tape?

How To Fix Headphone Wires With Tape

Gather all the necessary tools and materials

Before you begin fixing the wires make sure you have these items:

  • Tape for electrical use
  • Wire cutters
  • Sandpaper (optional)

These items are likely to be in your home or office. You can also find these items at your local store. You can use your utility knife to cut wires.

Step 1: Separate and cut the wires

If you can see the copper wire from outside the insulator, the process is easy. In many cases, you may need to locate the correct part.

To cut the problem or area, you can use your wire cutters and utility knife. Two separate cables will be required for each headphone.

After the cable is wire cutters, you can remove the insulation from the wires to inspect the problem areas.

If you have two headphones, you will see copper wires on both ends. If your headphones only have one thread, you’ll see a green wire.

Separate the wires so that they don’t touch one another. Red and copper wires should be placed in their own spaces. To make it easier and cleaner to work in, you can remove insulation.

The red/green wires were designed to transmit audio. You won’t be able to hear quality audio if the red and copper wires touch each other. Sometimes, there is no audio at all.

Step 2: Remove the Wire Coatings

Now, after separating the wires, you need to burn the wire coatings. In the previous step, we discussed the cables that transmit audio.

Enamel is applied to the wires. This insulation must be removed before you can reconnect the wires.

This is how you do it. The lighter can be used to lighten the tip of the wire for just a second. Use sandpaper to clean the tips of wires if you have it. Sandpaper is sometimes used instead of lighter, but they can be combined if needed.

Repeat the process for the remainder of the cable.

Step 3: Connect the wires again

Remove the coatings and take out the red wires on each end of the cable. Twist wires together. Crossover and twist the headphone wires together.

Continue this process until the wires are securely connected and cannot be separated accidentally. Do the same thing with the copper wires.

Ensure that the red/green and copper wires do not touch each other while you are doing this. You may not be able to fix the wires. If you do not check, the wires can shorten if you use the headphones later.

Step 4: Cover the Twisted wires with an electrical tape

Cover exposed wires with electrical tape if they are not in direct contact. Make sure they don’t interfere with copper wires.

After that, tape around the entire area where the wires were joined. Make sure you do not leave any wires exposed.

If your headphone wire has been damaged in more places, you can use the same procedure. Although it may take longer, the techniques are the same.

Step 5: Check the headphones

You have now successfully taped the headphone wires. You should now be able to use your headphones without any issues. You can confirm that the damage has been repaired by taking out your audio source to check if it plays quality music.

Your headphone should look as good as new if you have followed the above steps and the cable has not been damaged beyond repair. This method will solve most of your headphone-wire issues. However, it would be best not to use electrical tapes to fix severe headphone wire damage.

Note:

These methods are generally effective. They can still fail, especially if the steps aren’t followed correctly. It’s best to contact a professional if this happens or buy a new pair of headphones entirely. To avoid any problems, make sure you follow the proper protocols to dispose of broken headphones.

Further More: Best Headphone Mic Combo 2021: Top Brands Review

What should I do if the wires of my headphones are severely damaged?

There are two options for fixing damaged headphone wires. These options are more difficult than the one above. Before you move on, it’s worth considering whether these are worth the effort.

You might be able to make use of your warranty. This is the best and most cost-effective way to go. You only have a few moments to do this. If you have the time, try these advanced methods to fix your headphones’ wires.

Noting: If possible, the warranty is the best and most cost-effective method to do this. Before you do any of these things, make sure your headphones are still covered under warranty.

Related Post: How To Fix Headphone Jack?

Your Headphone Wires (Use Electric Tape Too)

Start by looking for suitable materials and tools. A soldering kit is also necessary, in addition to the tools and materials we have already mentioned.

This is an excellent alternative to using electrical tape to fix your headphone wires. This is best for people who are comfortable working with solder. This is usually done when the dame’s head is at the base.

To expose wires, you’ll need to follow the above steps. Then, sand the cables to remove the enamel coating. You can burn it off with a soldering iron or lighter, as we have seen.

Step 1: Use personal protective equipment

This equipment prevents you from inhaling harmful chemicals and can help protect your health.

Step 2: Soldering the Wires

Next, twist the wires together. Then use the soldering torch to melt the solder on the wires. Allow the solder to set entirely before cooling it.

Step 3: Wrap each wire with electrical tape

Make sure the wires are not in direct contact. This prevents a short circuit.

Step 4: Cover the headphone cord.

Use the rest of the electrical tape to wrap the wires.

Repair Without Solder: Use Heat Shrink Tubing

Many people are afraid to use electrical tapes to fix their headphones, especially if it involves soldering. Let’s find out how heat-shrink tubing could help.

Soldering, as we mentioned, is more involved and potentially dangerous. However, soldering is a great way to fix severe headphone wire damage.

Heat-shrink tubing is a good alternative.

All the tools and materials we mentioned in the previous advanced method are required, except for a soldering tool. A heat-shrink tub would be helpful,

Step 1: Take out the Insulators

To expose the stripped wires, use the wires strippers. Do not cut the cables.

Step 2: Disconnect the Wires

You can separate the wires according to color. The right-side headphone cables will be red, and the left will be green/blue. Ground wires can be either gold or copper.

Step 3: Remove the coating

Use a lighter to melt the varnish material that is covering the wires. Sandpaper can be used alone or combined as in the first method.

Step 4: Disconnect the Wirings

Use the electrical tape to separate the ground and colored wires.

Step 5: Select the Best Heat-Shrink Tubing

Plastic materials such as PEP, PVs, and polyolefin are the best for heat-shrink tubes. Pick one that matches the size of your headphones’ cables.

This will ensure a snug fit. These tubes shrink between one-sixth to one-sixth when heated.

Step 6: Wrap the area.

To clean the wires, use a clean cloth and isopropyl alcohol. This will remove any grease or debris.

Step 7: Insert the tube.

The tube should be inserted into the area that is frayed. Wrap the line tightly to achieve a compact finish.

Step 8: Heat the wrapped area

To heat, the area around the wrap, use the heat-shrink tube kit’s heating device or the lighter. The tube may catch fire or melt if you heat it moderately. Use pliers or any other protection to your fingers while heating the line. 

Why is self-repair important on a global and individual scale?

Why self-repair is important on a global and individual scale

There are good chances that your cable will fail again because of a pet’s impatience. You can save a lot of money if you learn how to repair cables yourself.

This is known as planned obsolescence. This goes beyond handsets, as cables are often the first to fail in headphones and earbuds.

If you don’t want to spend a lot of money every time your headphone cables go out, self-repair can be a great skill. It not only gives you a better understanding of the technology, but it also saves you money.

  • Try other methods, choose the one that works best for you.

How To Fix A Bent Headphone Jack? Top Full Guide 2021

How To Fix Headphone Jack Without Soldering? Top Full Guide 2021

Our trash doesn’t just end up in landfills.

Manufacturing headphones are expensive. Producing headphones is a huge environmental and ecological burden. Many of us throw them away when they break. This waste is then taken to the landfills by waste management.

This waste is often sent to an underdeveloped country to release corrosive and toxic byproducts into the soil and water.

The export of our refuse immediately impacts our trash to developing countries to accept it. Outsourcing is a way to get rid of the problem. If the rubbish isn’t in water-filled containers, it can be burned.

According to the World Health Organization (WHO), Dioxins are released, which can cause cancer and developmental problems in children.

It has a socioeconomic effect on the region. It is up to the countries to find a solution to manage imported waste. In some cases, however, illegal dumping may be involved.

After a lengthy dispute, 1.5 tonnes of unapproved trash from the Philippines was returned to Canada. It had been falsely classified as recyclable plastic in 2013/2014.

While you won’t change the world by repairing one cable, macro change starts at the micro-level. You don’t have to be a helpless customer when something breaks. Repairing your cables yourself means that you won’t be left stranded.

We can learn more about expensive and environmentally harmful products such as smartphone repair by doing at-home repairs to our cables. The immediate benefit is that you save money and no longer have to deal with an automated customer support agent, which can be the true bane of product failure.

Conclusion

It’s too simple to solve how to fix headphones wire with tape, isn’t it? From a roll of adhesive tape, you can protect your charging cable from cable breakage or peeling, but at a very cheap cost and extremely simple.
If you find it interesting and useful, please Comment and Share Hooke Audio for everyone to refer to.

Leave a Reply

Your email address will not be published. Required fields are marked *