Want to know how to make your subwoofer have more bass? Head over to this tutorial for some pointers on how to find out the best ways that will give you the boom that you want.
- 1 How To Make A Subwoofer Have More Bass
- 2 Alternative Methods
- 3 Conclusion
How To Make A Subwoofer Have More Bass
It is important to remember that subwoofers can be enhanced to produce more bass, but you cannot improve the subwoofer’s quality. Before you adjust, make sure you have realistic expectations.
These some simple ways will allow you to get the best low-frequency sound possible from your quality subwoofer:
1 – Put Your Subwoofer In The Right Position
When it comes to getting the best out of your sub, you need to pay attention to its placement. A subwoofer placed incorrectly can cause a significant reduction in the quality of your music and affect the whole system.
The placement of subwoofers can have a significant impact on the bass sound quality. The location of the subwoofer will have a significant impact on how waves travel and how it will affect car bass performance.
In Your Car
To make the most of the space in your trunk when placing your sub or car audio system in your car’s interior, you should consider using it. The trunk not only gives you more space to place the subwoofer where you want it but also lowers the risk of theft or break-ins to your speaker system. It will not affect bass performance by placing it in your trunk as sound can penetrate surfaces.
The sound quality of your sub will not be affected by the location it is placed in the trunk. It can penetrate through almost any surface. You will need to make sure your subwoofer is not pointing towards another speaker when it’s in the trunk. If speakers are facing one another, the sound standard will be distorted and lessened.
After placing the car subwoofer into your trunk, you can move it around until the right placement. This will not give you your desired bass but instead a muddy sound. Some cars prefer the subwoofer facing up, while others find the best bass-sounding car speakers facing the front.
A dedicated subwoofer amplifier can greatly enhance the sound system. Each active subwoofer has its own amplifier installed so that it can be used in a single configuration. Its position can greatly impact its sound quality.
Passive subwoofers require a multichannel amp, more power, and connections to multiple subs to produce more bass.
At Your Home
You should also be careful about where your subwoofer is placed in your home. For the highest sound quality, your sub should be placed within 8-12 inches of the wall facing the outside. You can get a better sound standard by placing your subwoofer in a corner of your room. This will allow you to increase your overall output.
2 – Improve the Quality of Your Music
You can also get more bass from your subwoofer by improving the quality of your music.
You will need to make sure that you set the best quality music for both streaming and downloading music when streaming digital music. You should be able to increase the overall quality and also boost the bass under playback. This combination allows you to get the best out of your music streamed. You can also boost the bass output from your sub.
You can take your music to the next level by connecting your subwoofer to an analog recorder such as a vinyl recorder. Record players such as Victrola that play analog recordings have a superior quality sound than digital. This is due to the warmth of the music and the details embedded within it.
You can make your subwoofer more powerful by upgrading to analog playback. Victrola recorders not only have a powerful, yet intimate, car stereo system but are also adaptable and simple to connect to your sub. You can find the perfect record player for your subwoofer with its timeless design and wide selection of price ranges.
3 – Use an Attachment
Subwoofer enclosures can produce a better bass response. To produce powerful, clear bass, they should be made from high-quality materials.
This may seem obvious but it is important to ensure that your subwoofer enclosures fit properly. This will prevent sound leakage and optimize the bass’ sound. Two main types of subwoofer enclosures will affect the sound of your bass when it is being played.
Ported enclosures allow for greater output or louder bass. They allow the sub to use more air to create the deep bass sounds that we love so much. These enclosures have a downside: if you’re listening to too much Rock, Metal, or other music that has low bass, you won’t get the sound you want.
This will allow sound waves to travel through the pillow stuffing. As fewer air moves within the box, this will improve bass performance.
A sealed enclosure allows for a more precise sounding bass. This is fine for country, metal, and rock listeners as they don’t have the bass needed to seal an enclosure. This is because sealed enclosures don’t provide deep low frequencies due to the small amount of air available.
Although some audiophiles might argue that one enclosure is better than the other, it comes down to personal preference and the type of bass you desire from your sub. It doesn’t matter what enclosure you choose, it is crucial to ensure that your subwoofer has one. A sealed sub is often used for compact space as there is less area that needs to be filled with bass.
You can adjust the enclosure’s size or add ports to your subwoofer box. For large rooms, a large subwoofer box is a good idea.
Our experts also suggest that you purchase aftermarket speakers and make the enclosure for your sub. Attach the sub to your enclosure and stuff the rest with pillows.
Read more our related post: How To Test Subwoofer
4 – Make Adjustments
To get the best bass from your subwoofer, make some adjustments to the volume, crossover, and phase switches.
Crossovers are used to prevent improper frequency response to ensure that each speaker driver receives the correct frequency.
Before you adjust the mass levels, make sure that you have to fine-tune the crossover of the subwoofer. The crossover refers to the frequency at which the subwoofer kicks in with the bass notes.
You should adjust the crossover as soon as your main speakers begin to taper. The rule of thumb is to adjust the crossover 10 Hz higher than that of the car’s stock speakers. If your speaker has a frequency of around 80 Hz, your crossover point should be set at 90 Hz. This will prevent any buzzy or distorted sounds from being created.
You can also adjust the subwoofer’s bass volume to improve your listening experience. As with the equalizer settings, there are no ideal bass volume levels. It all depends on the preferences of the listener.
This step is easy but can be time-consuming. You will need to select a song with bass, and then listen to it, and adjust the volume manually. To make it impossible to hear the sub, turn down the volume. Slowly increase the volume to hear the bass you desire without distortion.
The Phase Switch
Subwoofers are now equipped with a switch at the bottom or backside, which is called the “phase switch”. This switch controls the frequency and polarity of the sub.
There are only two options for making adjustments to the subwoofer’s phase control: 180 or 0 Fortunately, you can simply switch between these settings once you have adjusted the volume and crossover to determine which setting produces the best sound. There is no right or wrong answer. It all boils down to personal preference.
Choose The Right Wiring To Produce Your Bass
Your amplifier must have the correct power to produce the bass you desire. This is how it should look:
A bend in your water hose can slow down the speed at which you can wash your car. This is because less water is being drawn out of your hose. You will need to rinse your car more often if you use less water. Amplifiers are no different. Without the right amount of power, they can only do so much.
To carry the correct amount of power to your amplifier, you need to use the correct diameter wire.
Please do not use CCA Wire to power your car audio equipment. This stuff can cause sound problems and damage over time.
The bass performance will be affected if the speaker wires are not properly connected or are loose. This can cause distortions or electrical damage. It is important to inspect the connections and wires.
Take a Look at a Subwoofer Horn
Listeners often seek out the powerful bass even if they are not near their subwoofer. A sub horn is a good way to achieve this effect. This will increase the interaction between the speaker and the air around it.
Subwoofer horns improve the bass quality by directing the sound to the listener’s location. You can still feel the bass’s intensity even if you are far away from the source.
Subwoofer horns can also cause distortions in audio quality because of air resistance. Making sure that not too much wind enters and pushes against the horn’s surface will lessen the distortion of the sound coming from the subs.
Tweak Equalizer Bass Settings
The car stereo audio equalizer adjustment can make your listening experience more enjoyable. This is a labor-intensive and time-consuming process to increase the bass output of your subwoofer.
There is no one perfect equalizer setting. It changes depending on what the listener prefers. Adjusting the equalizer bass settings should be done slowly, in small increments, and with attention to finding the right setting.
You can adjust the low pass filter together with the equalizer settings to create a powerful bass.
Check out Power Source
The lower frequencies require more power than the higher ones. It is important that the subwoofer draw enough power. It may not be able to be bass boost tones if the power is insufficient.
Unreliable power sources can also cause electrical malfunctions that can damage your subwoofer and other components of your car audio system. To prevent potential damage to electronic equipment, a voltage protector is recommended.
It can be difficult to make a subwoofer have more bass. It takes knowledge, planning, and skill to do this. You will need to take into account your budget, room size, amplifier power, and the type of woofer that you are using to ensure that you get the desired outcome. Consider these aspects carefully in order to correctly plan your project.