You want the sound quality of your ears to change a bit. Why aren’t my headphones loud enough? How to make your headphone louder?
You are quite satisfied with your headphones. After a period of use, you find that it is still missing something like a little bass, or the sound is sticky. Check out the HookeAudio article below!
Experiencing music is a wonderful thing after moments of daily stress. With a compact set of headphones, how to get clear, detailed sound like in the studio is always something that makes you wonder.
The following article would like to share with you some tips to make a pair of headphones sound better.
Why are headphones so low volume?
The following are likely reasons why your headphones have a low volume:
- Your device or equipment can be set to low volume
- Audio card/components/jack malfunction
- Dirty headphones
- Broken headphones
- Update your device
- Problem with your hearing
How to Choose the Right Gadget?
The best earbuds are the ones that you choose. The right pair doesn’t necessarily have to be the most expensive but should provide loud enough quality and bass. Earpieces are affordable and can be used to protect your ears.
To find the best pair for you, look at various pairs before you make a decision. To test the quality of the music, you can mix old and new songs. You should also know if you prefer open or closed formats.
In-ear headphones that are closed can cause sound distortion and isolation from outside sounds. Open headphones allow airflow and sound to pass through. Although it produces high-quality sound, it does not isolate you from outside noises.
These are the points that will help you to understand this information in a few words.
Sensitivity is denoted by the SPL (sound pressure level) and the reason for Earbuds’ loudness. This converts the electrical signals into acoustic. For sensitive ears, you should choose earbuds with medium or high sensitivity.
Headphone impedance is the opposition to current flow. The Current flow is affected by the Impedance.
Frequency Response is simply a measure of whether or not your earbuds have good bass. Different frequencies (Hz) can produce different sound qualities.
These are just a few options. You can also choose whether you want earbuds with rubber, plastic, or silicone tips. Silicon tip, rubber, and foam are better for small ear holes. These earbuds are known to be the best, as they don’t cause any harm to small ears. For larger ears, plastic earbuds are best.
How to make headphones louder? 10 Tips
Remove earwax from your ears and clean them
This may make you wonder how it will help. You can enjoy the music you hear through your headphones by cleaning your headphone pad (by soapy water) or ears. Ear wax can easily form if you use headphones or earphones for a long time.
You will have hearing problems if you don’t clean your ears regularly; ear wax may be why you have hearing difficulties if your headphones are not on.
Buy a better pair of headphones
Even if you have tried all of the above methods but failed, it might be time to get new headphones. You might need to upgrade your headphones
There are so many options available when it comes to choosing the right headphone. Check the price range of the products you are interested in, and then sort them based on reviews and ratings to find the best one.
Use Audio Boosting Apps
You can find tons of volume-boosting apps online, both paid and free. These apps will increase your headphones’ output. Volume-Boosting Apps allow you to increase the volume by up to 200%, which will double your headphones’ performance.
These apps can be downloaded on all platforms, including Android, iPhone, and Windows.
Available for IOS users:
Equalizer Pro app
Kaisertone Audio Player
SonicMax Pro Music app
PlayerXtreme Media Player
Available for Android users in the play store
VLC Media Player
Viper4Android [ Requires root ] Volume Booster Pro
- Equalizer Pro
- VLC Media Player
- DFX Sound Enhancer
Warning! Do not use headphones if you have turned the volume up to maximum. Your eardrums can get damaged. You should adjust the volume limit gradually to see if your ears are comfortable with the loudest headphones.
For the best audio performance, adjust your device’s sound settings.
Both smartphones and computers come with audio settings. Make sure your audio settings are set to maximum. Go to settings, look for music or other audio options, and check whether it is set to maximum. You can adjust it to the volume you prefer.
Make sure you set your volume to maximum (Adjust EQ Settings)
Users of both Android and iPhone can adjust the volume using the volume buttons on their phones.
These steps can be followed by Mac users to verify their volume levels
- Select Sound and open System Preferences in the Apple Menu.
- Choose the Headphones option under the sound Output tab.
- You can adjust the main volume or do Audio Balancing using the sliders.
- Right-click the speaker icon on your Taskbar
- Click on Open Volume Mixer.
- Use sliders to adjust the audio output for different applications.
You can adjust the headphones’ audio balance if it feels off (menu search)
- Use Windows Key + R to search for Sound then click on Sound Settings.
- Click on Device properties in the Sound Settings Window. You can adjust the volume on both the left and the right sides of the headphones.
Make sure to clean your headphones
Cleansing your headphones can make a big difference in the audio quality. Headphones are often used for hours and days.
Dust can build up over time if you live near roads or are close to construction sites. The microscopic particles can cause the sound to become muffled and distorted.
Begin by removing the cushion pads and ear tips. Next, clean them thoroughly. To clean the ear tips and remove any wax or dust, you can use a cotton bud. Warm water can be used to wash your ear tips. This will remove any wax or bacteria.
You can easily clean the mesh with a dry toothbrush. Next, take a dampen or alcohol-soaked cloth and clean the entire thing. It is a good habit for headphones to be cleaned.
Read More: How To Clean Headphone Pads?
How to make your Headphones louder: Use a headphone amplifier
The headphones can be used as a portable speaker, but they are also very comfortable. An amplifier can improve the sound quality of headphones and provide a rich audio output., just like home speakers but headphone amplifiers can’t use the full power of headphones in smartphones and laptops.
Unfortunately, most amplifiers won’t work with expensive, high-quality headphones. Make sure the amplifier is compatible with your headphones before you install it.
Hardware issues should be checked
The connection is one of the main reasons your headphones don’t sound better. Both wired and wireless headphones can experience this problem. A loose audio connection can cause static noises or audio that is unclear.
Check that your device can support your headphones. Make sure your headphones are plugged in. This is a sign of a problem. It could be because the socket or headphone jack is damaged.
If your headphone works well on all other devices, it is most likely that the problem is with your original device. The headphone jack may be damaged if your headphone does not work on any of your devices.
If there is a wall or metal barrier between the headphones and themselves, wireless headphones may experience connectivity problems. To enjoy better audio quality, reduce the distance between them as much as possible.
You can listen to music using a better app, player, or website
Many music streaming and apps are available online. You can search for songs of higher quality and stream music at high resolution without having to download them. These apps allow you to adjust the audio quality and enhance the sound level.
These apps are great for testing out what works best for you.
- Google Play Music
- Apple Music
- YouTube Music
- Amazon Music
Other apps are also available. To ensure that they are safe, make sure you read and verify ratings before you download them.
Make sure to check the File Compression
Headphones can lose their power over time. Sometimes, you want to crank up the music. Here are some ways to bring back the music.
Understanding the chain that connects you to your favorite listening material is key to solving these problems. The music, the playback device, and your headphones are the first. You can adjust the volume of your music using both software and hardware. All you have to do is find the weakest link and add one.
Compression increases the volume of the soft parts and lowers the loud ones. Although it doesn’t change the file’s volume in physics, it creates the illusion that it is louder because it has less contrast.
The result is that a podcast, or any other type of talk-heavy audio file, may seem a little muted when it switches to a high-quality music file. It may also sound quieter if you are used to an MP3 version of a compressed song.
Make audio louder: Upgrade Your Headphones
You may need to get new headphones. Just like everything else, your headphones will eventually wear out.
Consider features that reduce background noise when you upgrade. If your earbuds let in too much noise, noise-canceling headphones, or closed-cup, under-ear headphones can block it and allow the music to shine through.
However, you should be aware of how noise-canceling headphones function. This may not be the best way to protect your hearing.
You Might Also Like: How To Measure Headphone Decibels? Top Full Guide 2021
Above are simple ways to make a pair of headphones louder and better. Hooke Audio hopes the sharing based on your practical knowledge will help you find your fit solution.