How To Wrap Up Earbuds 2022? Top Full Guide

How To Wrap Up Earbuds Top Full Guide 2022
  • Anthony

Here’s a quick and easy guide on how to wrap up earbuds. If you have a pair of earbuds regularly, you may notice that the cords can become tangled and difficult to manage. Luckily, there are a few simple ways how to wrap earbuds with string so that they are more organized and easier to use. With a little bit of time and effort, you can keep your earbuds looking and working like new.

How To Wrap Up Earbuds

How to wrap up headphones

Step 1: Start by signing the ASL “I Love You” sign with one of your hands. Place the plug end under your middle finger and ring fingers.

Step 2: Use your other hand to wrap the cord around your pointed fingers. After each wrap, cross the middle. The cord should wrap around each finger in the same direction. It is a figure 8 and not a loop.

Step 3: Wrap the wire until you reach your earbud cord wrap DIY. You don’t have to make it tight. Instead, use your fingers to form each loop.

Wrap the wire until you reach your earbuds

Step 4: Pull the cables in the middle, then remove the entire thing from your hands.

Step 5: Wrap the plug end around your center a few more times to create a simple bow.

Video:

Other Ways To Wrap Headphones

Other Ways To Wrap Headphones

1. Doing Crazy 8 Knots

  • You should check your headphones for any knots or tangles. First, ensure that your headphones don’t have any knots or tangles.
  • Make a fist. Make a fist before you fold the headphones.

Doing Crazy 8 Knots

  • Wrap the headphones around your index finger and your pinkies. You can tie the knot by wrapping the headphones around your index finger and pinkies until you have left a little bit of wire.
  • Then tie the knot. Take it out of your hand, wrap it around the headphones’ middle and tie a simple knot.
  • You are done. It is now ready to be stored in your pocket, or anywhere else you choose.

2. Doing a Double Wrap

  • Be sure to check for tangles. Before you begin folding, untangle them.
  • Fold your headphones in half, then fold them in half again. Continue folding your earbuds until they are the same size as a small ruler.

Doing a Double Wrap

  • Then tie the knot. Make a knot by carefully looping the end of the headphone over the end.
  • Done! Now you can store it.

Relevant posts:

3. Making a DIY Headphone Holder

  • Get your supplies. You will need some glue and a small piece of Velcro to make a DIY holder.
  • Attach the Velcro at the tail of your headphones. The Velcro should be placed in the area just above the plug.

Making a DIY Headphone Holder

  • Wait for 5 minutes. Allow the glue to dry for 5-10 minutes before the Velcro attaches to the headphones.
  • Your headphones should be wrapped. You can fold your headphones and wrap them with the Velcro strap.
  • Done! Now you can store it.

Conclusion

We hope our guide will help you know how to wrap headphones with string easily. Leave a comment to let us know that you found this guide helpful. Thank you for spending your time at Hookeaudio.com. We are grateful for your support.

Leave a Reply

Your email address will not be published. Required fields are marked *