The Kenwood KSC-SW11 is a compact subwoofer specifically designed for home theater systems. Using a combination of a polypropylene cone and rubber surround, the KSC-SW11 provides a surprisingly powerful sound for its small size.
In this Kenwood KSC-SW11 Subwoofer review, Hooke Audio will give all of the information about the pros, cons, characteristics of this product.
- 1 Kenwood KSC-SW11 Compact Powered Enclosed Subwoofer
- 2 Kenwood KSC-SW11 Subwoofer Review
- 3 Alternatives
Kenwood KSC-SW11 Compact Powered Enclosed Subwoofer
- Older models are quite affordable
- A very little assembly is required
- User-friendly, intuitive design
- Comes with all the mounting hardware
- Bass output is lower than in other models
- Audio quality lower at max volume
- Amp built-in, consumers unable to select amp type/quality
The value of newer models is lower (and more expensive). The Kenwood KSC SW11 powered Subwoofer has a recommended output of 75 watts RMS. This is a much more manageable model than the competition which can produce anywhere from five to six times the bass.
The Kenwood KSC SW11 is a powerful subwoofer for such a small unit. The unit can be powered so users don’t need to buy and install their own amps. It’s small at just five by eight inches across the face.
While newer models may be more expensive than others, older models are often half the cost of the newer models. This is more reasonable.
This model is great for someone who doesn’t need a lot of basses but also wants a lot more flexibility when it comes to placement in the vehicle.
The Kenwood KSC SW11 compact enclosed subwoofer, which is on our list of the best car subwoofer is a head-unit sound system that provides rich sound quality and an enjoyable listening experience. Kenwood speakers come pre-installed, so you only need to wire the enclosure to your speaker system.
The Kenwood KSC SW11 compact enclosed subwoofer will give your car the bass you want. The compact subwoofer, the KSC SW11 Compact Enclosed Subwoofer, can enhance your music and provide you with a wired remote control that allows you to adjust volume or phase control.
Kenwood KSC-SW11 Subwoofer Review
Who Is This Product For?
This product’s bass output is significantly lower than its competitors, so it will be aimed at novice users who don’t need a subwoofer. Subwoofers typically have watts RMS outputs of 400 or more. This Kenwood model has a maximum output of 150 RMS, and a recommended output of 75.
This is not to say this is a poor value. This piece has many positive aspects. It’s small, which is a huge benefit and allows the user to place it in a variety of ways.
The amp is also powered so the user doesn’t have to buy or install an amp. These features make the Kenwood product an excellent choice for both new consumers and those who are more familiar with the market.
This Kenwood piece is pre-assembled and comes in a single unit. It makes it easy to find out what’s inside. The piece is not included, but you will find a remote control in the box. This is a nice little perk.
The subwoofer includes an amp, but it is already included in the unit. This one is easy to assemble and doesn’t require a lot.
Overview of Features
This subwoofer’s size is key. It measures only 40 inches in area, which is quite small. A nice perk is a remote control. The amp itself is already integrated into the subwoofer, so it will not require any installation.
This Kenwood model has two main features: (1) its small size and (2) its low bass output. Although it won’t provide a lot of basses, it will be a significant upgrade to your car audio system.
How to Make the Most Of It
This model is easy to install and very intuitive.
This could be interpreted by users as a disadvantage, as they have little control over how the product is set up and cannot determine what amp it has. The supplier handles all that.
There are no tricks that will make this more valuable, and the installation is very simple and requires little knowledge or effort.
How Does the Kenwood Ksc-Sw11 Active Subwoofer Work?
Although it may be smaller, the Kenwood KscSw11 powered subwoofer can still deliver powerful bass. This small subwoofer might be what you’re looking for if you need something that can fit under your car’s seat.
This can produce low frequencies that can be equaled by large car subwoofers in your trunk. This is also the best option if you need bass without a lot of space.
The Kenwood Ksc_Sw11 will give you the best bang for your buck by encasing an 8-1/4″ by 5-1/8” woofer in a custom-tuned enclosure. The subwoofer’s rigid aluminum enclosure eliminates rattles. A high-quality amplifier feeds the subwoofer a clean 75 W RMS.
The installation of the Kenwood KSC SW11 is easy. Kenwood provides all the wiring and mounting brackets necessary to complete this task. Your power wires as well as your signal wires are contained in the wiring harness.
Mounting the powered enclosure in a location where it is less likely to be damaged is a good idea. This means that you should keep it out of damp areas or places where air can’t freely flow. Each amp requires air to stay cool.
This powered bass system comes with a wiring harness. It is very simple to use. The wiring was designed to work in various situations. Not all cars allow for the same type of wires. We gave them huge ‘Cool Points” when they saw the versatility of the wiring harness and wired bass knob.
There have been two ways to wire subwoofer enclosures that are powered. The Kenwood KSC–SW11 is the same. The Kenwood KSC-SW11 also has a Hi/Lo input option that allows you to connect to both a factory stereo and aftermarket stereo. Because of their convenience options, more and more vehicle owners choose to keep their factory radios. Here is a breakdown of each wire on the Ksc–Sw11 Harness.
[Kenwood Ksc-Sw11 Review] – Wire Harness Color Code:
- (Yellow wires – Constant 12-volt) – Connect to your vehicle’s battery or an ignition harness that supplies constant 12 volts to it.
- (Blue Wire with White Stripe – Amp Turn On) -Should connect to a circuit that receives 12 Volts only while the vehicle is being driven, such as an ignition wire and cigarette light harness.
- (Red RCA – Right-side signal input) – Plug into the red RCA connector with grey speaker wires.
- (White RCA – Left Side Signal Input) – Plug into the white RCA plug and use white speaker wires.
Now that you know where the wires from your white harness plug should be connected to in your car, let’s talk about how you actually get sound out of your car and put it into an amplifier.
Why Do We Recommend This System To You?
You will need an enclosure, sub, and amplifier to produce bass. However, it can be tricky to match these up.
We hope this Kenwood Ksc–Sw11 Review will help you save some time and money by recommending a powered sub and its carefully matched amplifier.
Kenwood’s all-in-one solution was created for small vehicles that don’t have enough space to mount an amplifier. It also fits in vehicles with cargo space. While most powered subs are small, flat boxes that fit under the driver’s seat, there are larger and more powerful systems that you can place in your trunk.
The Kenwood KSC SW11 can improve the quality of your car’s bass. It can be easily fitted under your seat. This item doesn’t require a lot of space, so it will fit easily into your car.
You can easily adjust the frequency response and volume of your subwoofer using the included wired remote. You don’t need to adjust settings of the amplifier each time you want more bass. You can adjust the frequency response button on your wired remote to get the right tune for you.
Rockville RWS12CA Subwoofer
The subwoofer provides a lot of basses, about three times the average. It also comes with an easy-to-use assembly kit and a detailed installation guide. This subwoofer is great for beginners who want a little more bass.
Skar Audio D4 Subwoofer
This model will produce six times as much bass as the Kenwood model and is an excellent option for those who want to get maximum bass output. The consumer will need to purchase and install the amp themselves, which can be difficult for new consumers.