Why Do My Airpods Keep Disconnecting 2022? Top Full Guide

AirPods are a luxury with a price tag of at least $160, which is hard for most people to pay for something that doesn’t work as intended.

AirPod connection problems have been quite common recently, And if your AirPods disconnect from your iPhone during phone calls or while you’re streaming music, you are not alone and don’t worry, it is quickly fixable.

In this article, Hooke Audio will let you know why do my AirPods keep disconnecting? And the easiest ways to fix it.

Why Do My AirPods Keep Disconnecting?

The Airpods are a welcome upgrade to the Apple earbuds. They don’t come without their problems. AirPods can sometimes disconnect from your device for a variety of reasons. Some are more difficult to fix than others.

It doesn’t matter what; it is essential to understand the causes of disconnections to take preventive steps to stop them.

Bluetooth Interference

Airpods, like all Bluetooth headphones wireless, are susceptible to Bluetooth interference.

Bluetooth-compatible devices can cause interference with your Airpods’ connection. This can lead to disconnection.

Bluetooth interference can occur, for example, when you are next to a Wi-Fi router. The router communicates with another device using the same frequency at 2.4GHz.

Issue With iOS Version

You may experience bugs or other errors in iOS versions that are out of date. These connection issues can include compatibility problems between your AirPods and device.

Hardware Problem

Sometimes, the problem could be in the electronics of the AirPods.

Your AirPods may have sustained physical damage, which could lead to faulty electronics, which can cause intermittent performance problems. AirPods can be taken anywhere, as they are designed to be portable.

You want to make sure they are taken care of as much as possible. Protective cases for your Airpods are a great way to make sure they don’t get hurt.

This can also help to prevent damage from accumulated debris or wax build-up. This will prevent damage from wax or accumulated debris.

Wrong Settings

Your AirPods might not be able to maintain a consistent connection if your device doesn’t have the correct settings.

It’s a good idea to check the Bluetooth settings regularly to make sure your AirPods are connected to every device with which you pair them.

This is also a problem when you connect your Airpods to Android. Although they can technically connect, it is not as seamless as when the Airpods are associated with Apple devices. Some features might not be available or may require some settings adjustments.

Low Battery

Because they are wireless devices, AirPods require sufficient charging to work correctly. AirPods that are running flat will cause them to disconnect from any paired device. This can happen in some cases randomly if your battery is nearly empty.

To avoid any questionable performance, it is recommended that you keep them charged. Whenever both your earphone randomly disconnect from your device, the first thing you should do is check the battery status

Incompatible Bluetooth versions

Apple AirPods are compatible with Bluetooth 5.0 devices. If your Windows PC or other devices use an older Bluetooth version, AirPods will have to lower their connection speed to match your audio device. This means that your AirPods will not be able to reach their maximum range or connection quality.

Firmware issues

There have been several complaints about the problem with the latest firmware 6.8.8 release. According to some customers, the update caused a slew of audio issues, including but not limited to: AirPods shutting down after around 30-45 minutes of music-only playing, AirPods disconnecting after about 10 seconds in calls, and transitioning from music playback to call results in disconnection.

Unfortunately, this firmware issue persists for the first version of AirPods. AirPods 2 and AirPods Pro, on the other hand, have already gotten a newer upgrade to version 3E751. This resolves the device’s disconnection difficulties. So, whether you have the AirPods 2 or AirPods Pro, upgrade the firmware.

Follow these procedures to do this:

1. Navigate to your iOS Settings and choose Bluetooth.
2. Locate your AirPods in the device list.
3. Tap the I symbol to the right of them.
4. The current firmware version of your AirPods may be seen on the following page. If it’s 3E751, you already have the most recent firmware. If not, connect your AirPods to your iPhone when your WiFi is turned on, and the update should be installed immediately.

Quick Fixes Airpod Keep Disconnecting

1. Re-Establish the Connection With Your iPhone

Re-establishing the connection between your iPhone and your AirPods can be helpful if they suddenly stopped connecting to your iPhone.

Place your AirPods Max or AirPods Max into the Smart Case or Charging Case and wait for them to recharge. Then, take them out once more to reconnect.

2. Keep Your AirPods and iPhone Closer Together

This is probably obvious. However, the greater the chance of your iPhone generating poor audio quality, the farther you are from it. You should keep your distance to less than 30 feet.

3. Disable and Re-Activate Bluetooth on Your iPhone

You can fix AirPod-related connectivity problems by disabling and reactivating Bluetooth.

Just open the iPhone’s Control Center by simply swiping down from the top-right corner of the screen or swipe up at the bottom to reveal the Airplane Mode icon.

To reactivate Bluetooth, wait for up to 10 seconds before tap the Airplane Mode icon once again.

4. Disable Automatic Ear Detection

Automatic Ear Detection detects when your AirPods have been placed in your ears and automatically disconnect them. It can cause audio to drop, especially if you are prone to fidgeting with either the left airpod keeps turning off or the right AirPods while wearing them. Disabling Automatic Ear Detection may help.

To enable Bluetooth:

1. Go to Settings > Bluetooth.
2. Tap the Info icon beside your AirPods.
3. Disable Automatic Ear Detection.

5. Deactivate Automatic Switching

AirPods automatically switch between Apple and Android devices once you start playing audio with iOS 14. To avoid abrupt disconnects, disable the functionality if you have an iPhone, iPad, or Mac.

• Click Settings > Bluetooth to open the Info icon beside AirPods.
• Next, tap Connect to this iPhone and choose When Last Connected To This iPhone. Repeat this process for each iOS or iPadOS device you own.
• Go to System Preferences > select Bluetooth on your Mac and choose Options next to your AirPods.
• Next, change the When Last airpods Connected to this Mac setting to Connect to This Mac.

6. Avoid Wireless Interference

Your AirPods may also be affected by wireless interference. You should also check if there are any familiar sources of interference, such as poor shielding power cables, microwave ovens, and wireless speakers. It would help if you got rid of them.

7. Update the Firmware on Your AirPods

AirPods that are running out of firmware may experience issues and stop them from functioning correctly. Connect your AirPods to your iPhone and go to Settings > General > AirPods to verify that the Firmware Version is current.

The latest firmware version can be found by quickly searching on the internet or the AirPods Wikipedia page.

Start by connecting your AirPods to a power source. Keep your iPhone close to you and wait at least 30 seconds before turning it on again. That point should have updated your AirPods.

8. Update Your iPhone

Numerous bug fixes have been added to the latest iOS update for iPhone. These could fix connectivity issues with AirPods. To update your iPhone, go to Settings > General > Software.

Try restarting your iPhone if you don’t see any updates pending. Navigate to Settings > General > Shut down and drag the Power icon to your right. Please wait for 30 seconds after the device has shut down before you turn it on again.

9. Reset Your AirPod

You can reset your AirPods if you continue to experience problems with AirPods not connecting randomly.

Place the AirPods into the Smart Case or Charging Case. Hold down the Status button or the Noise Control and Digital Crown buttons on the AirPods Max until the indicator flashes amber. Now they are reset.

Take the AirPods out of the Case and follow the prompts on the iPhone’s screen to reconnect them.

10. Reset Network Settings

Resetting your iPhone’s network settings should fix corrupt settings that prevent your iPhone from communicating correctly with your AirPods.

Open the Settings on your device. Scroll down to General, and then tap on Reset. Over here, you will find Reset Network Settings. Tap on this to reset your network settings.

How to Fix Airpod That Disconnect From an iPhone

You can stop your AirPods keep disconnecting by going through this checklist.

Are they low on power? Are they out of control? Are you having a problem with one of your earbuds, or is it just a technical issue? We can also check for signal interference sources.

Step 1: Verify the battery levels.

• First, make sure that your AirPods are fully charged. You won’t hear any sound if they aren’t charging.
• These steps will allow you to check the AirPod charging status on your iPhone.

• Once you have the AirPods in the case, remove the lid and place the Case next to your iPhone.
• The Airpods battery life level will be displayed in a popup on the iPhone.

• You can also view the Battery widget on your iPhone. Scroll down and swipe left to right from the Home page.
• Scroll down until you see Edit. Tap on it to add the Batteries widget.
• This widget can also display the battery status for other multiple Apple devices, such as an Apple Watch.

Step 2: Check Bluetooth

• Make sure to turn Bluetooth on the device with which you are using the AirPods.
• Open Control Centre on the iPhone/iPad and verify that Bluetooth turned on.
• Alternatively, you can go to Settings > Bluetooth. To indicate that Bluetooth is active, you should see a green indicator.

Bluetooth can be turned off even if it is active.

• Go to Settings > tap Bluetooth the green switch until it turns white.
• Wait at most 15 seconds before turning Bluetooth back on.

The AirPods will not be connected now. However, they should automatically reconnect as soon as you select them as your audio source (see next step).

Step 3: Check your audio device settings

Also, ensure that you have selected your AirPod to be the audio device. This may happen to connect automatically if the AirPods recognize that they are in your ears. If it hasn’t, these steps will help.

• Tap the AirPlay icon below the track to play music on your iPhone (if the way is selected).
• Choose your AirPods from these options.
• When you are on a call, make sure that you have AirPods selected in the audio options.
• Tap on the speaker icon to change the audio source while on the call.
• Step 4: Disconnect your AirPods, then reconnect them
• The AirPods can be turned off and on again to solve many problems with electronic devices.
• Place the AirPods in their cases, close the lid, and wait for about 15 seconds.
• Open the lid, and then press and hold on to the button at the back.
• Please wait for the light flash to turn amber, then turn it white.
• Now your AirPods will have reset (this applies even if they’re not your AirPods).
• Place your AirPods beside your iPhone to reconnect them. Make sure Bluetooth is turned on.
• Next, go through the settings options for your iPhone.

Step 5: Clean your AirPod

You might consider giving your problem a thorough clean.

It is essential to be careful as you don’t want the Case to get scratched or damaged. In a separate article, we provide detailed instructions on how to clean AirPods.

Step 6: Only one AirPod

Reports indicate that the problem occurs less often if only one earbud is used, so it might be worth leaving one in the charging case.

You could also set up your AirPods so that one Microphone is being used.

• Open the AirPods case and go to Settings > Bluetooth.
• Tap the I to select Microphone from all the options.
• Automatic is the default setting, and both AirPods provide a microphone. You can change this to Always Left or Always Right.

Step 7: Disable the Automatic Ear Detection

You should also try to turn this feature off to see if your AirPods perform better without it.

• Open Settings > Bluetooth icon to access your iOS device.
• Tap the I near your AirPods to turn off the Automatic Ear Detection option.

This feature will automatically divert audio from your AirPods to your ears as soon as they detect them. However, it is worth checking to make sure there are no connection issues.

Step 8: Unpair your Watch

This issue could be due to pairing with AirPods and an Apple Watch. You might try unpairing your Watch to see if it continues.

It’s worth discharging any Bluetooth devices you may have in Case there is a conflict.

Step 9: Disable Wi-Fi from your iPhone

Why does my AirPods keep turning off? Although we don’t know why some Airpod users found that audio-related issues stopped after turning off Wi-Fi, we will investigate the cause of this problem in the next step.

Step 10: Find sources of interference with Bluetooth or Wi-Fi.

You could have audio drops because of interference from a variety of devices. These are some ways to prevent it.

If the problem occurs while on a phone call, move closer to your Bluetooth device (e.g., your iPhone).

Avoid microwave ovens, fluorescent lighting, wireless video cameras (baby monitors), and cordless phones.

To free up the 2.5G Hertz spectrum for Bluetooth, you can switch devices capable of using it to the 5GHz band. Here’s how you can change to the 5GHz band

The Way Fix Airpod Keep Disconnecting from Mac

• Check to make sure your AirPods are set up as the preferred output device.

• Open System Preferences on your Mac.
• Click Sound and then Output from here.

• To ensure that your AirPods are the active output device, select them from the device list.

Fixing Airpod Keep Disconnecting from Apple Watch

There is an easy way to make sure your Apple Watch and AirPods work at their best.

• Turn off your Apple Watch first, then your iPhone.
• To ensure that this is done correctly, turn on your iPhone and then your Apple Watch.
• After both devices have been turned on, connect your Airpods with your Apple Watch to check for performance issues.

Fixing Airpod Keep Disconnecting from Windows PC

AirPods can disconnect from Windows PCs in a way that is different from other pc. There are many possible problems. And this the ways to fix AirPods keep disconnecting from pc.

Disable Power Management

You may have noticed that your AirPods sometimes disconnect when you pause a song. This is because the Windows PC’s automatic on/off function can cause your AirPods to disconnect to conserve power. They think that there is no device connected.

This can be fixed by changing some settings in Windows.

• Pop up window-click your Start button, and then click Device Manager.

• Click on View to ensure that Devices by Type is selected.

• Expand the Human Interface Devices section to find these entries: AirPods Audio/Video Remote Controller HID and AirPods Hands-Free Call Control HID.
• Right-click on each one and choose Properties.

• Go to Power Management. Click ‘OK to uncheck the Allow the computer to turn off the order to save energy option.

• In some cases, the AirPods may not appear in the list. You can click on View in your taskbar and choose Show Hidden Devices.

Utilize Services App

Another option is to change the Bluetooth service settings from manual to auto in the Windows Services App. And this is a way to fix this disconnection issue.

• Click the search icon on the Windows taskbar to search for the Services app.
• Scroll down in the Services window until you see Bluetooth Audio Gateway Service and Bluetooth Support Service.
• Double-click the Bluetooth Audio Gateway Service, to set their startup type as Automatic. The Bluetooth Support Service can be used in the same way.
• After all, changes have been made, restart your device to see if the problem persists.

Uninstall Bluetooth Devices

If your AirPods do not appear in the Human Interface Devices or are already set to Automatic in services, but they still behave out, you can reset your Bluetooth by uninstalling your devices. This will fix all bugs and allow you to enjoy your connection for more than a few seconds.

These steps will help you do it:

• Search for your Device Manager in the Windows search box.
• Click on Bluetooth to uninstall each device one by one until they disappear altogether.
• After all the drivers have been removed, you can restart Windows. This will allow Bluetooth drivers to be reinstalled without any of their previous bugs.

Use a Bluetooth dongle

As mentioned previously, the problem could also be caused by a Bluetooth version difference between your Apple AirPods or PC. Your Apple AirPods might have to lower the Bluetooth version of your computer to connect.

Although you cannot upgrade your device’s Bluetooth version, you can use a Bluetooth dongle that supports version 5.0. This will allow your Windows PC to match the performance of your AirPods and provide faster data transfer and a stable connection.

Conclusion

Now you needn’t worry about Airpod’s disconnect, all method above is easiest to reconnect your AirPods to devices. Let’s enjoy your music that’s free of interruptions. We hope that this information is helpful for you. It’s simple but worth the effort! If you like to learn more tricks like this, make sure to subscribe to Hooke’s article.