Ever been frustrated Why does my soundbar keep cutting out? You’re not alone, and the problem might be more common than you think.
Soundbars typically have a built-in amplifier that receives the sound signal from the TV, processes the sound, and then transmits it to the speakers.
The soundbar should not be disconnected from the power, especially during use. If it does, the internal electronics could get fried due to overload. Read on to learn more about what causes a soundbar to cut out and how you can prevent it from happening again.
- 1 What Causes Sound Bars To Cut In And Out?
- 2 FAQs
- 3 Conclusion
What Causes Sound Bars To Cut In And Out?
Why does my sound bar keep cutting out? Soundbars can fail, although this is less common than it used to be. Soundbars may not work as intended. They will cut in and out frequently when this happens.
As you would expect, this is not ideal and can prevent someone from enjoying their entertainment. There are several reasons soundbars can stop working, but these are the most common.
- Bluetooth Interference
- Poorly connected wires
- Issues with the rear satellite kit
- Aging Components
- Wire Gauges
Bluetooth interference is the main reason sound starts cutting out. Bluetooth transmissions interfere is only applicable if you are streaming music or watching a movie to your sound bar via Bluetooth. The good news about this sound bar keeps cutting out is that it’s straightforward to solve the issue.
Note when you’re experiencing the problem. Is your sound bar cutting out when you connect via Bluetooth or HDMI cable?
Bluetooth interference is the root cause of audio cuts out only when connected via Bluetooth connectivity. If it doesn’t, then it could be a deeper problem.
There is no easy solution to sound bar problems caused by Bluetooth interference. There are, however, some things that you can do to help this problem. You can limit the number of Bluetooth connections that are being made at any one time.
This is particularly important when the soundbar connects TV via Bluetooth. Another option is to place your soundbar near your TV. However, this only works if the soundbar is positioned slightly farther from your TV.
To connect your devices to your sound bar, you can use an optical cable, HDMI cable, or an AUX Cable.
Poorly Connected Cables/Wires
Your sound bar may be cutting out because of poor connections to cables or wires. Your soundbar will cut out if your wire or cable isn’t making a good connection to it. Poor quality cables are another reason why your sound bar keeps cutting out.
The solution to poor connections is the same as for Bluetooth interference. Make sure your cable(s) is in complete contact with the soundbar’s connecting terminals and that it fits snugly.
It is a good idea to replace a lousy cable if the problem is caused by poor quality. Quality cables are recommended when replacing damaged cables. It would help if you preferred cables that the manufacturer makes of your sound bar or a well-respected company.
Rear Satellite Kit
Another common reason for soundbars cutting in and out is a rear satellite kit. It’s pretty familiar with soundbars.
The outdated software usually causes the problem with a rear satellite system kit. Because the model number of soundbars is designed to produce a particular sound, problems with a rear satellite kit can be caused by a lack of or update software.
Updates are the best and only way to fix this problem. You will need to software update. An update module possibly fixes the problem where your soundbar is constantly cutting out. This better solution is why it is essential to get the help of a professional.
It is recommended that you follow the step-by-step instructions if you decide to update your sound bar on your own. The manufacturer often shares these instructions.
Nearly every manufacturer’s model name of soundbars shares this information on its website. They also share links to the latest soundbar updates. The software update file will be shown in a pop-up window.
Another reason your soundbar keeps cutting out is age. Your soundbar, like any other device over time, can and will become less reliable with age. As the soundbar is used more, its components will wear faster. Components of your soundbar are the most likely to wear out over time.
Your soundbar’s components age over time. Components that age become less efficient. Sometimes, components may become less effective as they age. Your soundbar’s performance will suffer when this happens. You will notice that your soundbar cuts out frequently.
A professional is needed if aging components cause a problem with your soundbar. Depending on how severe the damage is, they might have to replace or remove the old components from the board.
Soundbars will work flawlessly no matter what you do once you have fixed the old components.
Another reason you may have problems with your soundbar is a cable or wire gauge.
Before we get into this, it’s important to note that a gauge is a measurement of the power that can be flowed across a given wire or cable at any one time. A soundbar will often cut if the gauge of a cable or wire is not correct.
This problem can be solved in a few steps. This problem can be fixed using a 16-gauge wire or cable if the soundbar is not more than 60 feet from the source (e.g., a TV or a PlayStation).
It is recommended that you use a 14-gauge if your soundbar is located more than 80 feet from the ground. All in all, ensure you know your distance accurately. A wrong distance can often indicate a weak signal and a sound cutting from time to time.
Will a soundbar work without a subwoofer?
Soundbars don’t require a subwoofer to add quality sound great. A soundbar can have multiple speakers, which can be great by themselves. However, a subwoofer will help produce lower frequencies than many soundbars. It is the best choice to connect a subwoofer to the soundbar.
How do I connect speakers to my computer without a subwoofer?
- Place your equipment: speakers, PC, or jack.
- Turn off the computer.
- Connect the speakers to the power socket.
- The 3.5mm RCA jack is located at the back end of the computer tower.
- To establish a strong connection, plug the jack into your audio source.
- Turn on your computer.
Why is my LG Soundbar constantly turning itself off?
When the unit is powered on using the AUTO POWER function, it will automatically shut off if there is not enough signal from the TV connected to LG Sound Sync (Optical cable/Wireless). You can be using the LG music flow app to fix the issue.
How can I update my LG soundbar?
The Home/Smart button can be pressed on the remote control. A message will usually appear at the bottom right corner of your Home screen when firmware updates are available. You can also manually check for updates using Settings on the right side.
How can I reset my LG sound bar?
- How to factory reset an LG SJ4Y Soundbar
- Unplug the power cord from the soundbar’s back or wall outlet.
- Wait 10 seconds.
- Turn the soundbar power on again.
To prevent audio cutting out, make sure that the input is turned on and connected to the TV.
If you’re still experiencing problems, contact your dealer or professional audio specialist for assistance.
A good soundbar and an optimally connected TV set with a surround sound system are essential for TV and movie enjoyment in the home. If you know of any such issues, share them with the community in the comments section below. Hooke Audio hope you find it useful.